Danfoss ECL Comfort controller – high performance for district heating
Electronic controllers for district heating
Danfoss is proud to introduce the seventh generation of electronic controllers for district heating. Based on the success and benefits of previous generations, the Danfoss ECL Comfort 210 and 310 controllers ensure comfort and convenience for heating, cooling and domestic hot water systems.
Less is more – benefits for you
The Danfoss ECL Comfort controller looks simple but works smarter, so it adds more to your performance than you would expect. For example, you can save on installation and commissioning time, reduce unplanned maintenance, benefit from a shorter learning curve, and reduce energy consumption.
On top of this, you get more built-in product features, more time for your business, and more satisfied customers. The advanced features and design never compromise ease of use, making installation, configuration and operation a breeze.
The design also provides a breath of fresh air. With clean, unobtrusive lines, an ECL fits into any surrounding. And the environment matters, so the ECL controllers enable you to reduce energy consumption, and as a result CO2 emission.
Engineered simplicity
Where most controllers for heating systems tend to become increasingly difficult to operate, Danfoss hastaken a new turn.
With the ECL Comfort 210 and 310 controllers, setting up and operating the heating installation has never been easier or more straightforward. With the ECL controller or ECA remote control unit, all navigation and interaction takes place by turning and pushing the dial on the front panel.
All menus and system data readings are shown on the graphic display in your native language, and the logicalmenu structure makes operation smooth and intuitive.
There are no blinking lights or arrays of buttons and switches, but the possibilities are unlimited. This ensures correct commissioning and easy day-to-day operation, which in turn ensures optimum comfort and reliability.
A few steps of commissioning that put you...
Countless advantages
For successful commissioning of the Danfoss ECL Comfort controller only a few steps are required. It is very straightforward, and in fact you don't need any special programming knowledge.
- Elegant no-fuss user interface
- Intuitive software makes operation a breeze
- Instant feedback displayed in your own language
- Access to user data, alarms, logs and settings
- User-friendly technical documentation
Setup wizard
Language selection
After wiring and connecting system components, such as pumps, actuators and temperature sensors, youcan insert the ECL Application Key. Use the turn/push dial to select your preferred language and follow the setup progress on the display.
Setup wizard
Application selection
Select your application from the system application range included on the ECL Application Key.You can choose from application specific factory settings or user specific settings if they have been stored on the key.
The key to avoiding potential headaches
The ECL Comfort controller is matched with a full range of ECL Application Keys. Each Application Key is programmed with specific parameters for a particular district heating or cooling application.
The ingenious ECL Application Key makes it easier than ever to install and set up your heating system application in the ECL controller, all without any need for advanced programming. This makes it easy to manage and adjust your application settings.
In the event of malfunction in the heating system the application parameters won't be affected by e.g. power failure since they are stored in the controller. Besides the data logging facility in the ECL controller facilitatestroubleshooting with no headaches, keeping system maintenance at a minimum.
The Application Key also facilitates copying of settings to other ECL controllers in the system. This makes it easy to adjust settings and helps ensure smooth operation and energy optimization for years to come.
Prepare for the future – and make the most of the present
With Danfoss, you're prepared for the future, and the ECL controller will accompany you every step of the way. Not only is the ECL Comfort controller designed to handle all of your district heating requirements; it is also ready to accept your future demands. If your need for network communication and monitoring heating systems in multiple neighboring buildings arises, it is easy to add and connect ECL controllers in a network.
The ECL controllers comply with market standards and demands and integrate seamlessly with key system components from Danfoss and other suppliers. Add to this the fact that installing, commissioning, servicing, and upgrading the ECL controllers can be done swiftly and efficiently, and you will see a sound return on investment.
Lower power consumption and system energy savings achieved by Danfoss ECL controllers help protect the environment by lowering CO2 emissions by 11-15 % or more. The controllers enable compliance with energyefficiency legislation in current markets and are well prepared to meet future demands as well. All in all, Danfoss ECL controllers will help you save time, money, and energy – now and in the future , no matter building type.
We mind your business
Danfoss is more than a household name in heating. For morethan 75 years we have been supplying our customers all overthe world with everything from components to complete districtheating system solutions. For generations, we have madeit our business to help you mind yours, and that remains ourgoal both now and in the future.Driven by our customers' needs, we build on years of experienceto be at the forefront of innovation, continually supplyingboth components, expertise, and complete systems forclimate and energy applications.We aim to supply solutions and products which give you andyour customers advanced, user-friendly technology, minimummaintenance, and environmental and financial benefits alongwith extensive service and support.Feel free to contact us or visit ecl.danfoss.comfor further information.
Hiç yorum yok:
Yorum Gönder